From Qianzhou to Shanghai: a Wuxi plant that builds coating, stenter and carpet finishing machines
When ITMA ASIA + CITME 2026 opens at the National Exhibition and Convention Center in Shanghai on 20–24 November, one of the exhibitors in hall H8.1 will be a machinery builder that has stayed in the same township for more than thirty years. Wuxi Qianzhou Xinghua Machinery Co., Ltd. will be at booth H8.1-D11.
Bao Heng
Author & Contributor
Wuxi Qianzhou Xinghua Machinery Co., Ltd.
When ITMA ASIA + CITME 2026 opens at the National Exhibition and Convention Center in Shanghai on 20–24 November, one of the exhibitors in hall H8.1 will be a machinery builder that has stayed in the same township for more than thirty years. Wuxi Qianzhou Xinghua Machinery Co., Ltd. will be at booth H8.1-D11.
The plant stands at No. 3 Longtan Road, in the Qianzhou Supporting Area of the Huishan Economic Development Zone, Wuxi, Jiangsu, China. The workshop itself dates to 1993, when the predecessor factory was established in Qianzhou. The limited company was registered on 12 November 2003. The site occupies 23,500 square metres of land and about 18,000 square metres of buildings. Machining, fabrication, sheet-metal and final-assembly work are done in four workshops on the same site, and the key rollers used on the machines are ground in-house rather than bought in as finished parts.
The company builds three families of equipment: textile coating machines, stenter machines, and carpet finishing equipment. It does not trade in other makers' machines, and it does not take on turnkey or complete engineering projects. The coating machines are used on blackout curtain fabric, tarpaulin, advertising fabric, luggage fabric and mesh fabric. The public catalogue currently lists 29 models: three stenters, eight coating machines and fourteen carpet machines.
Working widths typically run from 1.8 m to 4.2 m. Wide models are offered at a standard width of 4.2 m, with a maximum of 5.2 m. Drives are frequency-controlled; a common working speed is about 65 m/min, and the machine maximum is 100 m/min. Ovens are designed for temperatures up to 250 °C, and the heat source can be thermal oil, gas or steam, according to the customer's plant. Annual output is about 15 machines or lines. Registered capital is RMB 5 million, and the company describes its workforce as more than 100 people.
Quality and intellectual-property records are a matter of public certificates. Xinghua is a National High-tech Enterprise, certificate GR202532008525, issued on 19 December 2025, with recognitions running through the period 2016–2025. It holds ISO 9001 certificate 54326Q00104R2S3 for the manufacture of textile finishing equipment and carpet finishing equipment, valid until 29 September 2029. The company reports 119 patents. Among those that can be checked by number are a combined coating head, ZL201620737614.2; a combined fabric-infeed frame, ZL201620737615.7; a temperature-controlled infeed frame, ZL201620737657.0; and a carpet-coating electro-hydraulic servo control system, ZL201621138288.X.
A standard machine is typically delivered in about three months; a special model takes about four. Payment is a 30 percent deposit, with the balance due before shipment. Warranty is one year, with installation and commissioning at the customer's plant; technicians can be sent overseas, and after-sales support is offered for the life of the machine. Trial runs are carried out after installation at the customer's factory. Machines have been exported to more than 20 countries and regions.
Visitors to ITMA ASIA + CITME 2026 who work with coated fabrics, stentering or carpet backing are welcome at booth H8.1-D11. The company's website is https://www.xhmachinery.com/; the office telephone is +86 510 83397635.


